Product Selector

9 Results Found

ProTac® 1AA
  • Features Ten-Tap® Programming – Choose from three user selectable programs:
    1.) high/strobe/low (factory default)
    2.) high only
    3.) low/high
  • C4® LED illumination output and run times:
    HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
    LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
    STROBE – runs 4 hours
  • Solid State power regulation provides maximum light output throughout battery life


ProTac® EMS
  • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
  • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
  • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
  • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


    4AA ProPolymer® Lux Div 2
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      4AA ProPolymer® Xenon
      • Powered by 4 "AA" alkaline batteries
      • Features a xenon gas-filled module
      • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


        3AA HAZ-LO
        • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
        • RoHS compliant
        • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
        • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
        • Uses three "AA" alkaline batteries (included)
        • Push-button on/off switch easy to use even when wearing heavy gloves


        4AA ProPolymer® Xenon
        • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
        • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
        • Powered by four "AA" alkaline batteries
        • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
        • Push-button tail switch for momentary or constant “on”
        • Waterproof/Dustproof IP65


        3AA HAZ-LO® LED Headlamp
        • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
        • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
        • Push-button on/off switch easy to use even when wearing heavy gloves
        • Intrinsically safe – Class I, Div 1


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            3AA HAZ-LO® LED Headlamp
            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
            • Push-button on/off switch easy to use even when wearing heavy gloves
            • Intrinsically safe – Class I, Div 1

               
              ; Cache: True
               Page:  Flush: