Product Selector

12 Results Found

2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® Lux Div 1
  • Powered by 3 "C" alkaline batteries
  • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
  • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


    4AA ProPolymer® Lux Div 1
    • C4® LED technology, with a 50,000 hour lifetime.
    • Unbreakable polycarbonate lens with scratch-resistant coating.
    • 100 lumens typical; up to 4,200 candela peak beam intensity.


      2AA ProPolymer® Xenon
      • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
      • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
      • Powered by two "AA" alkaline batteries (included)
      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
      • IP57 rated design; dust and water ingress protected


      4AA ProPolymer® LUX
      • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
      • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
      • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
      • Uses four "AA" alkaline batteries (included)
      • IP67; waterproof to 1 meter for 30 minutes


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      3C ProPolymer® Lux Div 1
      • Powered by 3 "C" alkaline batteries
      • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
      • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


        4AA ProPolymer® Lux Div 1
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.


          Argo® HAZ-LO® Headlamp
          • Meets lighting needs to illuminate objects at a distance
          • Features one white C4® LED with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          Trident® HAZ-LO® Headlamp
          • Meets lighting needs for both close-up and distance work
          • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          Argo® HAZ-LO® Headlamp
          • Meets lighting needs to illuminate objects at a distance
          • Features one white C4® LED with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


          Trident® HAZ-LO® Headlamp
          • Meets lighting needs for both close-up and distance work
          • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation

           
          ; Cache: True
           Page:  Flush: