Product Selector

48 Results Found

Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      Survivor® (Alkaline Model)
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes:
        • High for a super-bright beam that pierces through smoke
        • Low for bright light and longer run time
        • Flash for signaling
        • Moonlight mode provides low-level lighting for battery conservation
      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      3AA ProPolymer® HAZ-LO®
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
        • Kit includes:
          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
          • Streamlight Helmet Mount
          • Rubber Helmet Strap


        3C ProPolymer® HAZ-LO®
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


          3C ProPolymer® LED
          • Powered by 3 "C" alkaline batteries
          • 10 ultra-bright 100,000-hour life LEDs
          • 85 lumens typical with 10 white LEDs, blue LEDs also available


            3C ProPolymer® Lux Div 1
            • Powered by 3 "C" alkaline batteries
            • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
            • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


              3C ProPolymer® Xenon
              • Powered by 3 "C" alkaline batteries
              • 785 mA xenon gas-filled module
              • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                3N ProPolymer® LED
                • Powered by 3 "N" alkaline batteries
                • 3 ultra-bright 100,000-hour life LEDs
                • LEDs provide up to 30 lumens, blue LEDs also available


                  4AA ProPolymer® Lux Div 1
                  • C4® LED technology, with a 50,000 hour lifetime.
                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                  • 100 lumens typical; up to 4,200 candela peak beam intensity.


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      2AA ProPolymer® Xenon
                      • Powered by 2 "AA" alkaline batteries
                      • Xenon gas-filled bi-pin bulb
                      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                      3AA ProPolymer® HAZ-LO®
                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                        • Kit includes:
                          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                          • Streamlight Helmet Mount
                          • Rubber Helmet Strap


                        3C ProPolymer® LED
                        • Powered by 3 "C" alkaline batteries
                        • 10 ultra-bright 100,000-hour life LEDs
                        • 85 lumens typical with 10 white LEDs, blue LEDs also available


                          3C ProPolymer® Lux Div 1
                          • Powered by 3 "C" alkaline batteries
                          • Up to 3,500 Candela (peak beam intensity), 44 lumens (typical)
                          • Runs up to 4 hrs. at full intensity with 16 additional hrs. of declining usable light


                            3C ProPolymer® Xenon
                            • Powered by 3 "C" alkaline batteries
                            • 785 mA xenon gas-filled module
                            • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                              3N ProPolymer® LED
                              • Powered by 3 "N" alkaline batteries
                              • 3 ultra-bright 100,000-hour life LEDs
                              • LEDs provide up to 30 lumens, blue LEDs also available


                                4AA ProPolymer® Lux Div 1
                                • C4® LED technology, with a 50,000 hour lifetime.
                                • Unbreakable polycarbonate lens with scratch-resistant coating.
                                • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                  4AA ProPolymer® Xenon
                                  • Powered by 4 "AA" alkaline batteries
                                  • Features a xenon gas-filled module
                                  • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                                    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                    • Features a 210 degree articulating head that rotates a full 360 degrees
                                    • 4 lighting modes
                                    • Optimized electronics provide regulated intensity


                                    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                                    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                    • Features a 210 degree articulating head that rotates a full 360 degrees
                                    • 4 lighting modes
                                    • Optimized electronics provide regulated intensity


                                    Stylus® – UL Model
                                    • Body available in Black
                                    • High-intensity 100,000 hour LED available in Artic White
                                    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


                                      Survivor® (Alkaline Model)
                                      • Available in rechargeable and alkaline models
                                      • Features C4® LED technology with four lighting modes:
                                        • High for a super-bright beam that pierces through smoke
                                        • Low for bright light and longer run time
                                        • Flash for signaling
                                        • Moonlight mode provides low-level lighting for battery conservation
                                      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                                      2AA ProPolymer® Xenon
                                      • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                                      • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                                      • Powered by two "AA" alkaline batteries (included)
                                      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                                      • IP57 rated design; dust and water ingress protected


                                      3AA ProPolymer® HAZ-LO®
                                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                        • Kit includes:
                                          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                          • Streamlight Helmet Mount
                                          • Rubber Helmet Strap


                                        3C ProPolymer® HAZ-LO®
                                        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


                                          3C ProPolymer® LED
                                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                          • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                          • Waterproof/Dustproof IP65


                                          3C ProPolymer® Xenon
                                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                                          • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                          • Waterproof/Dustproof IP65


                                          3N ProPolymer® LED
                                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
                                          • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
                                          • Powered by three "N" alkaline batteries (included)
                                          • Anti-static, impact-resistant polymer construction


                                          4AA ProPolymer® LED
                                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                          • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                                          • Powered by four "AA" alkaline batteries (included)
                                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                          • Push-button tail switch for momentary or constant “on”
                                          • Waterproof/Dustproof IP65


                                          4AA ProPolymer® LUX
                                          • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                          • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                                          • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                                          • Uses four "AA" alkaline batteries (included)
                                          • IP67; waterproof to 1 meter for 30 minutes


                                          4AA ProPolymer® Xenon
                                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                                          • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                                          • Powered by four "AA" alkaline batteries
                                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                          • Push-button tail switch for momentary or constant “on”
                                          • Waterproof/Dustproof IP65


                                          Stylus Reach®
                                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
                                          • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
                                          • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
                                          • Uses three "AAAA" alkaline batteries (included)
                                          • Features a momentary blink switch and constant on
                                          • Durable anodized aluminum construction; available in black
                                          • IPX4 water-resistant


                                          Knucklehead® HAZ-LO® – Flood Model
                                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                          • Features a 210 degree articulating head that rotates a full 360 degrees
                                          • 4 lighting modes
                                          • Optimized electronics provide regulated intensity


                                          Knucklehead® HAZ-LO® – Spot Model
                                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                          • Features a 210 degree articulating head that rotates a full 360 degrees
                                          • 4 lighting modes
                                          • Optimized electronics provide regulated intensity


                                          Polystinger® LED HAZ-LO®
                                          • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                                          • 3 modes:
                                            High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                                            Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                                            Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                                          • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                                            Survivor®
                                            • Available in rechargeable and alkaline models
                                            • Features C4® LED technology with four lighting modes:
                                              • High for a super-bright beam that pierces through smoke
                                              • Low for bright light and longer run time
                                              • Flash for signaling
                                              • Moonlight mode provides low-level lighting for battery conservation
                                            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                                            Knucklehead® HAZ-LO® – Flood Model
                                            • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                            • Features a 210 degree articulating head that rotates a full 360 degrees
                                            • 4 lighting modes
                                            • Optimized electronics provide regulated intensity


                                            Knucklehead® HAZ-LO® – Spot Model
                                            • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                            • Features a 210 degree articulating head that rotates a full 360 degrees
                                            • 4 lighting modes
                                            • Optimized electronics provide regulated intensity


                                            Polystinger® LED HAZ-LO®
                                            • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                                            • 3 modes:
                                              High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                                              Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                                              Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                                            • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                                              Survivor®
                                              • Available in rechargeable and alkaline models
                                              • Features C4® LED technology with four lighting modes:
                                                • High for a super-bright beam that pierces through smoke
                                                • Low for bright light and longer run time
                                                • Flash for signaling
                                                • Moonlight mode provides low-level lighting for battery conservation
                                              • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                              • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation

                                               
                                              ; Cache: True
                                               Page:  Flush: