Product Selector

22 Results Found

Stylus Reach® – UL Model
  • High-intensity white LED
  • 140 Candela peak beam intensity, 11 lumens
  • Uses three "AAAA" size alkaline batteries (included)
  • Seven-inch extension cable allows for 14" (35.6cm) of reach
  • Intrinsically safe.


2AA ProPolymer® Xenon
  • Powered by 2 "AA" alkaline batteries
  • Xenon gas-filled bi-pin bulb
  • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


3C ProPolymer® LED
  • Powered by 3 "C" alkaline batteries
  • 10 ultra-bright 100,000-hour life LEDs
  • 85 lumens typical with 10 white LEDs, blue LEDs also available


    3C ProPolymer® Xenon
    • Powered by 3 "C" alkaline batteries
    • 785 mA xenon gas-filled module
    • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


      3N ProPolymer® LED
      • Powered by 3 "N" alkaline batteries
      • 3 ultra-bright 100,000-hour life LEDs
      • LEDs provide up to 30 lumens, blue LEDs also available


        4AA ProPolymax®
        • TEN-TAP® programmable switch allows user selection of one of three different programs:
          • high/low/strobe (factory default)
          • high only
          • low/high 
        • C4® LED output:
          • High: 300 lumens; 17,000 candela; runs 2.75 hours
          • Low: 50 lumens; 2,500 candela; runs 24 hours
          • Strobe runs 6 hours
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


        4AA ProPolymer® Lux Div 2
        • C4® LED technology, with a 50,000 hour lifetime.
        • Unbreakable polycarbonate lens with scratch-resistant coating.
        • 100 lumens typical; up to 4,200 candela peak beam intensity.


          4AA ProPolymer® Xenon
          • Powered by 4 "AA" alkaline batteries
          • Features a xenon gas-filled module
          • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


            2AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
            • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
            • Powered by two "AA" alkaline batteries (included)
            • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
            • IP57 rated design; dust and water ingress protected


            3C ProPolymer® LED
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Waterproof/Dustproof IP65


            3C ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
            • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Waterproof/Dustproof IP65


            4AA ProPolymer® LED
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
            • Powered by four "AA" alkaline batteries (included)
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            4AA ProPolymer® LUX
            • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
            • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
            • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
            • Uses four "AA" alkaline batteries (included)
            • IP67; waterproof to 1 meter for 30 minutes


            4AA ProPolymer® Xenon
            • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
            • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
            • Powered by four "AA" alkaline batteries
            • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
            • Push-button tail switch for momentary or constant “on”
            • Waterproof/Dustproof IP65


            2AA ProPolymer® Xenon
            • Powered by 2 "AA" alkaline batteries
            • Xenon gas-filled bi-pin bulb
            • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


            3C ProPolymer® LED
            • Powered by 3 "C" alkaline batteries
            • 10 ultra-bright 100,000-hour life LEDs
            • 85 lumens typical with 10 white LEDs, blue LEDs also available


              3C ProPolymer® Xenon
              • Powered by 3 "C" alkaline batteries
              • 785 mA xenon gas-filled module
              • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                3N ProPolymer® LED
                • Powered by 3 "N" alkaline batteries
                • 3 ultra-bright 100,000-hour life LEDs
                • LEDs provide up to 30 lumens, blue LEDs also available


                  4AA ProPolymer® Xenon
                  • Powered by 4 "AA" alkaline batteries
                  • Features a xenon gas-filled module
                  • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                    Stylus Reach® – UL Model
                    • High-intensity white LED
                    • 140 Candela peak beam intensity, 11 lumens
                    • Uses three "AAAA" size alkaline batteries (included)
                    • Seven-inch extension cable allows for 14" (35.6cm) of reach
                    • Intrinsically safe.


                    PolyStinger®
                    • Xenon gas-filled bi-pin bulb with 30-hour life; spare bulb in tailcap
                    • Adjustable focus beam
                    • Up to 11,000 candela (peak beam intensity); 90 lumens


                      Stinger®
                      • Xenon gas-filled bi-pin bulb; spare bulb in tailcap
                      • Adjustable focus beam
                      • Up to 11,000 candela (peak beam intensity); 90 lumens

                         
                        ; Cache: True
                         Page:  Flush: