Product Selector

55 Results Found

Stylus Reach® 18"
  • High-intensity white LED, with a 100,000 hour lifetime.
  • 140 Candela peak beam intensity, 11 lumens typical.
  • 24 continuous hours runtime to the 10% lumen output level.
  • Cable allows for 25.5" of reach.


    Stylus® – UL Model
    • Body available in Black
    • High-intensity 100,000 hour LED available in Artic White
    • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


      Survivor® (Alkaline Model)
      • Available in rechargeable and alkaline models
      • Features C4® LED technology with four lighting modes:
        • High for a super-bright beam that pierces through smoke
        • Low for bright light and longer run time
        • Flash for signaling
        • Moonlight mode provides low-level lighting for battery conservation
      • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
      • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


      Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
      • Features a 210 degree articulating head that rotates a full 360 degrees
      • 4 lighting modes
      • Optimized electronics provide regulated intensity


      3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
      • Kit includes:
        • 3AA ProPolymer® HAZ-LO® with alkaline batteries
        • Streamlight Helmet Mount
        • Rubber Helmet Strap


      2AA ProPolymer® Xenon
      • Powered by 2 "AA" alkaline batteries
      • Xenon gas-filled bi-pin bulb
      • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


      3AA ProPolymer® HAZ-LO®
      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
        • Kit includes:
          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
          • Streamlight Helmet Mount
          • Rubber Helmet Strap


        3C ProPolymer® HAZ-LO®
        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


          3C ProPolymer® LED
          • Powered by 3 "C" alkaline batteries
          • 10 ultra-bright 100,000-hour life LEDs
          • 85 lumens typical with 10 white LEDs, blue LEDs also available


            3C ProPolymer® Xenon
            • Powered by 3 "C" alkaline batteries
            • 785 mA xenon gas-filled module
            • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


              3N ProPolymer® LED
              • Powered by 3 "N" alkaline batteries
              • 3 ultra-bright 100,000-hour life LEDs
              • LEDs provide up to 30 lumens, blue LEDs also available


                4AA ProPolymer® LED
                • Powered by 4 "AA" alkaline batteries
                • 7 ultra-bright 100,000-hour life LEDs
                • 67 lumens typical with 7 white LEDs, blue LEDs also available


                  4AA ProPolymer® Lux Div 1
                  • C4® LED technology, with a 50,000 hour lifetime.
                  • Unbreakable polycarbonate lens with scratch-resistant coating.
                  • 100 lumens typical; up to 4,200 candela peak beam intensity.


                    4AA ProPolymer® Xenon
                    • Powered by 4 "AA" alkaline batteries
                    • Features a xenon gas-filled module
                    • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                      2AA ProPolymer® Xenon
                      • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                      • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                      • Powered by two "AA" alkaline batteries (included)
                      • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                      • IP57 rated design; dust and water ingress protected


                      3AA HAZ-LO® LED Headlamp
                      • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
                      • RoHS compliant
                      • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
                      • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
                      • Uses three "AA" alkaline batteries (included)
                      • Push-button on/off switch easy to use even when wearing heavy gloves


                      3AA ProPolymer® HAZ-LO®
                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                        • Kit includes:
                          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                          • Streamlight Helmet Mount
                          • Rubber Helmet Strap


                        3C ProPolymer® HAZ-LO®
                        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours


                          3C ProPolymer® LED
                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                          • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                          • Waterproof/Dustproof IP65


                          3C ProPolymer® Xenon
                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                          • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                          • Waterproof/Dustproof IP65


                          3N ProPolymer® LED
                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.
                          • 3 ultra-bright white 100,000-hour life LEDs deliver 30 lumens; runs 120 hours
                          • Powered by three "N" alkaline batteries (included)
                          • Anti-static, impact-resistant polymer construction


                          4AA ProPolymer® LED
                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                          • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                          • Powered by four "AA" alkaline batteries (included)
                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                          • Push-button tail switch for momentary or constant “on”
                          • Waterproof/Dustproof IP65


                          4AA ProPolymer® LUX
                          • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                          • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                          • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                          • Uses four "AA" alkaline batteries (included)
                          • IP67; waterproof to 1 meter for 30 minutes


                          4AA ProPolymer® Xenon
                          • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                          • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                          • Powered by four "AA" alkaline batteries
                          • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                          • Push-button tail switch for momentary or constant “on”
                          • Waterproof/Dustproof IP65


                          Stylus Reach®
                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
                          • Features a 17.78 cm extension cable that allows for 35.6 cm of reach so you can illuminate those hard-to-reach areas
                          • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
                          • Uses three "AAAA" alkaline batteries (included)
                          • Features a momentary blink switch and constant on
                          • Durable anodized aluminum construction; available in black
                          • IPX4 water-resistant


                          Stylus®
                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for long periods. It has a maximum adverse surface temperature of <300°C.
                          • High-intensity 100,000 hour white LED delivers 11 lumens; 140 candela peak beam intensity, 24m beam distance; runs 24 hours
                          • Uses three "AAAA" alkaline batteries (included)
                          • Features a momentary blink switch and constant on
                          • Durable anodized aluminum construction; available in black
                          • IPX4 water-resistant


                          Survivor® LED (Alkaline Model)
                          • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp)continually preset. It has a maximum adverse surface temperature of <135°C.
                          • Available in rechargeable and alkaline models
                          • Features C4® LED technology with four lighting modes
                          • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                          • IP54 water-resistant; 2 meter impact resistance tested


                          2AA ProPolymer® Xenon
                          • Powered by 2 "AA" alkaline batteries
                          • Xenon gas-filled bi-pin bulb
                          • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                          3AA HAZ-LO® LED Headlamp
                          • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                          • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                          • Push-button on/off switch easy to use even when wearing heavy gloves
                          • Intrinsically safe – Class I, Div 1


                            3AA ProPolymer® HAZ-LO®
                            • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                            • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                            • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                            • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                              3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                              • Kit includes:
                                • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                • Streamlight Helmet Mount
                                • Rubber Helmet Strap


                              3C ProPolymer® LED
                              • Powered by 3 "C" alkaline batteries
                              • 10 ultra-bright 100,000-hour life LEDs
                              • 85 lumens typical with 10 white LEDs, blue LEDs also available


                                3C ProPolymer® Xenon
                                • Powered by 3 "C" alkaline batteries
                                • 785 mA xenon gas-filled module
                                • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                                  3N ProPolymer® LED
                                  • Powered by 3 "N" alkaline batteries
                                  • 3 ultra-bright 100,000-hour life LEDs
                                  • LEDs provide up to 30 lumens, blue LEDs also available


                                    4AA ProPolymer® LED
                                    • Powered by 4 "AA" alkaline batteries
                                    • 7 ultra-bright 100,000-hour life LEDs
                                    • 67 lumens typical with 7 white LEDs, blue LEDs also available


                                      4AA ProPolymer® Lux Div 1
                                      • C4® LED technology, with a 50,000 hour lifetime.
                                      • Unbreakable polycarbonate lens with scratch-resistant coating.
                                      • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                        4AA ProPolymer® Xenon
                                        • Powered by 4 "AA" alkaline batteries
                                        • Features a xenon gas-filled module
                                        • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                          Argo® HAZ-LO® Headlamp
                                          • Meets lighting needs to illuminate objects at a distance
                                          • Features one white C4® LED with low and high output modes
                                          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                          Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                                          • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                          • Features a 210 degree articulating head that rotates a full 360 degrees
                                          • 4 lighting modes
                                          • Optimized electronics provide regulated intensity


                                          Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                                          • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                          • Features a 210 degree articulating head that rotates a full 360 degrees
                                          • 4 lighting modes
                                          • Optimized electronics provide regulated intensity


                                          Septor® HAZ-LO® Headlamp
                                          • Meets lighting needs for a “up close” work when  seeing details is important
                                          • Features 7 white 5mm LEDs with low and high lighting modes
                                          • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                          Stylus® – UL Model
                                          • Body available in Black
                                          • High-intensity 100,000 hour LED available in Artic White
                                          • Light Output: 140 candela peak beam intensity, 24m beam distance and 11 lumens measured system output.


                                            Survivor® (Alkaline Model)
                                            • Available in rechargeable and alkaline models
                                            • Features C4® LED technology with four lighting modes:
                                              • High for a super-bright beam that pierces through smoke
                                              • Low for bright light and longer run time
                                              • Flash for signaling
                                              • Moonlight mode provides low-level lighting for battery conservation
                                            • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern
                                            • Strong spring-loaded clip securely grabs onto belts and gear; D-ring features forward hanging orientation


                                            Trident® HAZ-LO® Headlamp
                                            • Meets lighting needs for both close-up and distance work
                                            • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
                                            • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                            3AA HAZ-LO® LED Headlamp
                                            • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                                            • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                                            • Push-button on/off switch easy to use even when wearing heavy gloves
                                            • Intrinsically safe – Class I, Div 1


                                              Argo® HAZ-LO® Headlamp
                                              • Meets lighting needs to illuminate objects at a distance
                                              • Features one white C4® LED with low and high output modes
                                              • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                              Septor® HAZ-LO® Headlamp
                                              • Meets lighting needs for a “up close” work when  seeing details is important
                                              • Features 7 white 5mm LEDs with low and high lighting modes
                                              • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                              Trident® HAZ-LO® Headlamp
                                              • Meets lighting needs for both close-up and distance work
                                              • Features center C4® LED and three ultra-bright white 5mm LEDs with low and high output modes
                                              • Push-button switch is easy to use when wearing gloves and is recessed to protect it from inadvertent activation


                                              Knucklehead® HAZ-LO® – Flood Model
                                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity


                                              Knucklehead® HAZ-LO® – Spot Model
                                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity


                                              Knucklehead® HAZ-LO® – Flood Model
                                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity


                                              Knucklehead® HAZ-LO® – Spot Model
                                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity

                                               
                                              ; Cache: True
                                               Page:  Flush: